Menu
 
 
Menu
 
 
About
Products
All Products
JCR Edition Aero
JCR Aero Packs
Braking
Cooling
Engine
Exhaust
Induction
Interior
Suspension
Turbo
JCR Developments
Events
Blog
Contact
About
Products
All Products
JCR Edition Aero
JCR Aero Packs
Braking
Cooling
Engine
Exhaust
Induction
Interior
Suspension
Turbo
JCR Developments
Events
Blog
Contact
 

CARBON-FIBRE-AIR-INTAKE-SYSTEM

CARBON-FIBRE-AIR-INTAKE-SYSTEM

 

CARBON FIBRE AIR INTAKE SYSTEM

 

Price - £4,750.00

Introduction

At JCR only the very best will do utilising the best materials and creating the best performing Motorsport level solutions. We applied this ethos to the JCR Carbon Fibre Air Intake System. Super light weight, great gains in HP & TQ and stunning looks.

We were keen to keep the shortest run as possible from the air filter to the turbo compressor wheel, this not only reduces lag but also increases throttle response, two key elements on any boosted application. Weight, as always is another consideration meaning that Carbon Fibre was the natural choice, even down to the air filter frames.

To allow space for a huge increase in air filter surface area we took a fresh approach and rather than relocating the filters into the low pressure bumper area we retained the factory location and dramatically increased the size of the stock airboxes (over 300%) while allowing adequate space for 76mm (3") boost pipes and all other factory systems.

The JCR Carbon Fibre Air Intake System includes all parts required to convert your GTR to the lightest, best performing and most beautiful air intake solution available today.

Performance Gains

As with the JCR Carbon Fibre Inlet Manifold, we used the latest fluid dynamics software to ensure that the design of the airboxes were optimised for flow and therefore providing the least restriction possible while maintaining great filtration. We utilise 76mm (3") intake pipes and offer the airboxes with or without MAF housings depending on customer requirement.

The JCR Carbon Fibre Air Intake system holds a huge advantage over all other aftermarket intakes utilising open cone air filter by maximising the amount of cool air entering the turbos and moving the air filter location as close to the compressor wheel as possible, improving spool and response.

Expect gains in the region of 20-25whp depending on base HP levels when compared to the factory air intake system.

Carbon Fibre Framed Air Filters

As we have produced a bespoke air filter for each of the GTR Airboxes we also allow customers to spec the air filter grade based on their specific requirements, ensuring maximum safe performance. Each of our air filters are hand made by the world leaders at ITG using our bespoke Carbon Fibre air filter frames as the base.

We offer 4 grades of air filter as listed below:

  • STREET  -  An all weather high performance air filter. (750hp/filter)
  • TRACK    -  Occasional track use, super high performance air filter. (800hp/filter)
  • RACE      -  Occasional road driving, race spec air filter. (850hp/filter)
  • DRAG      -  Maximum flow without the removal of air filters. (950hp+/filter)

Carbon Fibre Coolant Tank

The JCR Carbon Fibre Air Intake System requires a centrally mounted coolant tank to make way for the 310% larger air filters as featured in the JCR Carbon Fibre Airboxes. The JCR Carbon Fibre Air Intake System includes this beautifully crafted piece.

The JCR Carbon Fibre Coolant Tank features not only a larger capacity but is also built super strong, built for pressures upwards of 10 bar, allowing users to install a higher pressure coolant tank cap, assisting further with keeping any tuned VR38 cool even during the most extreme use.

Stunning Looks

As with all of the JCR Carbon Fibre products, we use only the highest Motorsport grade prepreg material along with the very latest composite techniques to ensure not only a perfectly functional and reliably piece but also a beautiful finish.

We do not lacquer our Carbon Fibre pieces which saves weight and also because put simply, we dont have to.

Key Features

  • 0.6kg per airbox
  • 310% more filtration surface area vs. stock
  • Each Airbox assembly rated from 750hp to 950hp of flow ( Depending on filter choice )
  • Carbon Fibre filter frames
  • Quick change air filters
  • Reduced AIT's and super short intake path
  • Allows use of stock / aftermarket boost pipes
  • 76mm ( 3" ) intake pipe
  • 10 bar safe Carbon Fibre Coolant Tank

Options

  • Custom Carbon Fibre Finish ( Please Specify )
  • Air Filter specification ( Street / Race / Drag )
  • Available With or Without MAF housing

Pricing & Availability

  • £4750.00
  • Available Now

CARBON FIBRE AIR INTAKE SYSTEM £4,750.00

ORDER NOW

Introduction

At JCR only the very best will do utilising the best materials and creating the best performing Motorsport level solutions. We applied this ethos to the JCR Carbon Fibre Air Intake System. Super light weight, great gains in HP & TQ and stunning looks.

We were keen to keep the shortest run as possible from the air filter to the turbo compressor wheel, this not only reduces lag but also increases throttle response, two key elements on any boosted application. Weight, as always is another consideration meaning that Carbon Fibre was the natural choice, even down to the air filter frames.

To allow space for a huge increase in air filter surface area we took a fresh approach and rather than relocating the filters into the low pressure bumper area we retained the factory location and dramatically increased the size of the stock airboxes (over 300%) while allowing adequate space for 76mm (3") boost pipes and all other factory systems.

The JCR Carbon Fibre Air Intake System includes all parts required to convert your GTR to the lightest, best performing and most beautiful air intake solution available today.

Performance Gains

As with the JCR Carbon Fibre Inlet Manifold, we used the latest fluid dynamics software to ensure that the design of the airboxes were optimised for flow and therefore providing the least restriction possible while maintaining great filtration. We utilise 76mm (3") intake pipes and offer the airboxes with or without MAF housings depending on customer requirement.

The JCR Carbon Fibre Air Intake system holds a huge advantage over all other aftermarket intakes utilising open cone air filter by maximising the amount of cool air entering the turbos and moving the air filter location as close to the compressor wheel as possible, improving spool and response.

Expect gains in the region of 20-25whp depending on base HP levels when compared to the factory air intake system.

Carbon Fibre Framed Air Filters

As we have produced a bespoke air filter for each of the GTR Airboxes we also allow customers to spec the air filter grade based on their specific requirements, ensuring maximum safe performance. Each of our air filters are hand made by the world leaders at ITG using our bespoke Carbon Fibre air filter frames as the base.

We offer 4 grades of air filter as listed below:

  • STREET  -  An all weather high performance air filter. (750hp/filter)
  • TRACK    -  Occasional track use, super high performance air filter. (800hp/filter)
  • RACE      -  Occasional road driving, race spec air filter. (850hp/filter)
  • DRAG      -  Maximum flow without the removal of air filters. (950hp+/filter)

Carbon Fibre Coolant Tank

The JCR Carbon Fibre Air Intake System requires a centrally mounted coolant tank to make way for the 310% larger air filters as featured in the JCR Carbon Fibre Airboxes. The JCR Carbon Fibre Air Intake System includes this beautifully crafted piece.

The JCR Carbon Fibre Coolant Tank features not only a larger capacity but is also built super strong, built for pressures upwards of 10 bar, allowing users to install a higher pressure coolant tank cap, assisting further with keeping any tuned VR38 cool even during the most extreme use.

Stunning Looks

As with all of the JCR Carbon Fibre products, we use only the highest Motorsport grade prepreg material along with the very latest composite techniques to ensure not only a perfectly functional and reliably piece but also a beautiful finish.

We do not lacquer our Carbon Fibre pieces which saves weight and also because put simply, we dont have to.

Key Features

  • 0.6kg per airbox
  • 310% more filtration surface area vs. stock
  • Each Airbox assembly rated from 750hp to 950hp of flow ( Depending on filter choice )
  • Carbon Fibre filter frames
  • Quick change air filters
  • Reduced AIT's and super short intake path
  • Allows use of stock / aftermarket boost pipes
  • 76mm ( 3" ) intake pipe
  • 10 bar safe Carbon Fibre Coolant Tank

Options

  • Custom Carbon Fibre Finish ( Please Specify )
  • Air Filter specification ( Street / Race / Drag )
  • Available With or Without MAF housing

Pricing & Availability

  • £4750.00
  • Available Now
 
Instagram
Facebook
Twitter
Copyright© JCR
Instagram
Facebook
Twitter
Copyright© JCR
 
Loading...